Inflate, Deflate, and Equalize up to 2 tires with no installation, and no prep. Just pull your MORRFlate Duo 2 Tire Inflation & Deflationâ„¢ Kit out of its storage bag, hook it onto your tires, and grab a drink while all your friends get their squats in.

The MORRFlate Duo is made with simplicity and durability in mind. It is rated for up to 26CFM, 150 psi, -40 to 350 degrees F. It is kink and abrasion resistant, does not hold memory, and there is no installation required.

Unlike the MORRFlate Quad 4 Tire Inflation & Deflationâ„¢ Kit, there is a lot less hose to deal with. However, you can only do 2 tires at a time. So, if you are good at coiling garden hoses, then the MORRFlate Quad 4 Tire Inflation Deflationâ„¢ Kit may be the best choice. If not, then the Duo is what you want. We have found that for 34-35" tires and lower, it is slightly quicker (by a few seconds) to air up and down with the MORRFlate Duo. With tires bigger than 34-35" it is much quicker to air down with the MORRFlate Quad.

The MORRFlate Duo is just over half the overall length of the MORRFlate Duo+. It is comprised of two, 13ft leads (as opposed to two 24ft leads on the Duo+). This means you have less hose to deal with when you coil up the kit and put it away in its carrying bag.

The entire MORRFlate line will work "plug n play" with any air source that uses an "IM Coupler" to connect to. This means ARB compressors and Power Tanks. If you have a Smittybilt, Viair, Warn Powerplant, or something else modeled off of one of those, you will need to check out our MORRFlate Adapter Kits.

If your air source is in an oddball location, or you just want a little bit more reach, check out our MORRFlate Extensions.

To read the complete writeup, check out our article on The MORRFlate Off Road 4 Tire Inflation Deflationâ„¢ Kits.